Hot water heating floor automation set
A smart heating set that includes one base station, a temperature sensor, a multi-switch and a wired valve regulator.
€381
Starting from
Hot water heating floor automation set
Base station
Temperature sensor
Multi-switch
Wired Regulator
Seamless look, quick setup
The base station connects Istabai devices and makes the magic happen. Installing it is quick and easy – it only takes a few minutes. No need to pull cables and you won't even need to move your furniture. Its minimalist design suits all interiors.
Miniature, yet highly sensitive
The Istabai temperature sensor is tiny and unobtrusive, yet incredibly precise when it comes to temperature readings. It measures temperatures within 0.1 degree precision, so that you can adjust heat for your optimal comfort.
Connect with anything
The multi-switch is a multifunctional device that lets you control any electrical device from your smartphone, tablet or computer with an internet connection. Tap to manage electrically heated floors. Tap to open your garage door. Tap to start music. Up to 6 connections and unlimited possibilities to expand your home automation.
Sometimes it's better with a wire
Set it up. Plug it in. Forget about it. Once it's up and running, you won't need to take it off. No batteries means one less thing to worry about. Small enough to fit in the most awkward and narrow places in your home, so it's perfect for heaters that are difficult to access.
Center frequency 868.3MHz
Proprietary IST-RF Protocol
Indoor Coverage Up To 30m
Controls hundreds of Istabai devices
Height: 25mm
Width: 110mm
Depth: 100mm
Weight: 140g
Operating temperature -20 .. +40 C°
Operating humidity: 5% .. 95%
2 year limited warranty
Standard Ethernet cable connection
Supply Voltage 9V DC
Power Adaptor included
Average power consumption 1W
Temperature -40 .. +85 C°
Resolution 0.01 C°
Accuracy ± 0.3 C°
Humidity sensing range 0..100% RH (Relative humidity)
Resolution 0.025% RH
Accuracy ±2% RH
Center frequency 868.3MHz
Proprietary IST-RF Protocol
Indoor Coverage Up To 30m
Built in Li-Polymer battery
Micro-USB charging port
Charge cycle life typically 1 year
Height: 18mm
Width: 56mm
Depth: 56mm
Weight: 52g
Operating temperature -20 .. +65 C°
Operating humidity: 5%..95%
2 year limited warranty
Center frequency 868.3MHz
Proprietary IST­RF Protocol
Indoor Coverage Up To 30m
Standard DIN rail mount
Height: 90mm
Width: 53mm
Depth: 66mm
Weight: 122g
Operating temperature -20 .. +40 C°
Operating humidity: 5%..95%
2 year limited warranty
Supply Voltage 12/24V DC
Average power consumption 1W
Two Power Relays with 10A / 2500W power handling capability
Four Logical Switches with 12/24V, 1A output
Center frequency 868.3MHz
IST-RF Protocol
Indoor coverage 30m
Height: 56mm
Width: 56mm
Depth: 18mm
Weight: 52g
Operating temperature 20 .. +65 C°
Storage temperature 30 .. +70 C°
2 year limited warranty
Supply Voltage 90..250V AC
Average power consumption 1W
Standard M30x1.5mm radiator valve control
Wide variety of adapters to fit nearly any other valve
No instruments required for installation